Siemens 75, 3070 System settings, Configuring music-on-hold, Audio settings, Step, Music on Hold

Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01

System settings

Step

by

Step

System settings

Configuring music-on-hold

The caller hears music-on-hold when put on hold by the base station rather than the exchange (e.g. in the case of internal transfer). The following settings can be selected:

Internal	Integrated default melody
Off	Music-on-hold via connection 21 or 22. This menu item only ap-
	pears if "Ext. music/hold" is selected when the device type is set
	to connection 21 or 22.

1.Press  for selection menus.

2.Select using [ˆ] and [OK]: Service Set up → Settings → System settings →

Music on Hold.

3.Select using [ˆ] and [OK]: required type.

This feature is also available when a call is held via 2 B-channels, see section "Conducting a call externally or via a second B-channel" on page 23.

Audio settings

With this setting you can define a ringer melody for each MSN, valid for all called handsets. Independent of this setting, you can also select a different ringer melody for the handset for internal calls.

Assigning a ringer melody to an MSN

Each newly assigned MSN is automatically assigned its own ringer melody. This setting enables you to change the type of melody.

1.Press  for selection menus.

2.Select using [ˆ] and [OK]: Service Set up → Settings → ISDN settings →Set up MSN.

3.Select using [ˆ] and ['] : (required MSN).

4.Select using [ˆ] and [OK] : Ringer Melody.

5. Select using [] or [ ] one melody from 0 to 9 and confirm with [OK].

Configuring an internal ringer melody for a handset

1.Press  for selection menus.

2.Select using [ˆ] and [OK] : Settings → Audio → Ringer Melody.

3. Select using [] or [ ] one melody – this melody is generated in the handset self and played back directly – confirm your selection with [OK].

25