![Modifying settings](/images/new-backgrounds/135156/13515699x1.webp)
Gigaset 3070/3075isdn, GB, | giga3070KAP.fm | 09.01.01 |
Answering machine (3075isdn only)
Step
by
Step
Modifying settings
Defining the number of rings
Factory setting: automatic 2/4. In this case the answering machine operates as
follows: if there are no messages, the announcement is activated after 4 ring cycles; if messages have already been left, the announcement is activated after 2 cycles. When you check your messages remotely, this enables you to tell af- ter 3 ring tones that there are no new messages. If you hang up immediately, no call charges are incurred.
1.Press for selection menus.
2.Select using [] and [OK]: Service Set up → Answ. Machine → (required AM) → Settings → No. of Rings →
Activating/deactivating output of the date and time
If the time stamp is activated, all messages include the day, date and time of recording.
1.Press for selection menus.
2.Select using [] and [OK]: Service Set up → Answ. Machine → (required AM) → Settings → Message/Memo → Time Stamp.
Defining recording length
The message can either be 1 minute, 2 minutes or 3 minutes long, or of max- imum length.
1.Press for selection menus.
2.Select using [] and [OK]: Service Set up → Answ. Machine → (required AM) → Settings → Message/Memo → Message Length → (required recording length).
Setting recording quality
If you set the recording quality to
1.Press for selection menus.
2.Select using [] and [OK]: Service Set up → Answ. Machine → (required AM) → Settings → AM Quality → High quality or Long recording.
Remote control
You can also operate your answering machine externally, e.g to play back and delete messages. To do this you must modify the answering machine PIN (factory setting: 0000) to ensure maximum security. To ensure full functionality for this type of operation, remote control and remote delete must be enabled.
46