Gigaset 3070/3075isdn, GB, | giga3070KAP.fm | 09.01.01 |
Locking/unlocking ISDN features
Step
by
Step
Locking/unlocking ISDN features
Conducting a call externally or via a second B-channel
With this setting you can define whether enquiry calls are held via the provider (externally), or in the base station (via a second
1.Press for selection menus.
2.Select using [] and [OK]: Service Set up → Settings → ISDN settings → Int. Enq. Call or Ext. Enq. Call
Transferring calls - activating/deactivating ECT (Explicit Call Transfer)
This function is only required for ECT (Explicit Call Transfer) behind PABXs.
1.Press for selection menus.
2.Select using [] and [OK]: Service Set up → Settings → ISDN settings → Tran- sition(ECT).
Call waiting - activating/deactivating CW
When call waiting is activated, the caller hears the
If call waiting is deactivated, the caller hears the ring tone if you are already con- ducting a call and additional devices are assigned to this MSN.
If call waiting is deactivated, the caller hears the busy signal if you are already conducting a call, and are either the only user assigned this MSN, or if the fea- ture Busy on Busy (see below) has been activated.
1.Press for selection menus.
2.Select using [] and [OK]: Service Set up → Settings → Set up user → Set up device → (required internal subscriber) → ['] →
Call waiting.
Busy on Busy (busy signal when MSN is engaged)
With this setting, the caller immediately hears the busy tone when a member of the same MSN group is conducting a call.
1.Press for selection menus.
2.Select using [] and [OK]: Service Set up → Settings → ISDN settings →
Busy on Busy.
3.Select using [] and [OK].
The selection is confirmed with .
*. It may not be possible to implement this feature in your country. Either the feature needs to be activated by the provider (you may be charged for this serv- ice), or it is not offered in your country in this form. If in doubt or if you have any questions about available ISDN features and their activation, contact your serv- ice provider.
23
