Siemens 75, 3070 manual Getting started, Connecting the base station, Step, £ Power failure

Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01

Getting started

Step

by

Step

Getting started

Connecting the base station

76

77

4.

1.

5.

3.

2.

1.V socket: insert in the ISDN connection cable until the plug locks into place.

2.Insert in the ISDN connection cable in the ISDN socket until the plug locks into place.

3.In the case of NTBA with self-assembly, insert the cable between the NTBA

and the TAE (old telephone socket) until both plugs lock into place.

4.socket: insert the mains connection cable securely into the plug and insert

the plug into the socket.

5.If required, connect the PC via USB cable to the USB bus (only supported with Windows 98).

Only the plug-in power supply unit provided should be used (see un- derside of base station).

£Power failure:

In the event of a power failure, your base station, the handsets which are registered at it and any corded terminals are not operational. All set- tings and saved information (messages, directory entries) are retained for an unlimited period.

Profiset talk&surf:

It is not possible to install Profiset talk&surf and Gigaset talk&surf simultane- ously on the same PC. Otherwise, problems will occur as both programs at- tempt to access the same interface. You must therefore choose either Gigaset talk&surf or Profiset Talk&surf. When upgrading, the old program version must first be deinstalled.

5