Gigaset 3070/3075isdn, GB, | giga3070KAP.fm | 09.01.01 |
Making comfort calls
Step | Internal call forwarding |
by |
|
Step | Configuring a forwarding destination |
|
|
1.Press for selection menus.
2.Select using [] and [OK]: Service Set up → Int.forwarding → Forward. dest. → (required internal subscriber).
Only one forwarding destination can be selected for internal call forwarding.
Activating/deactivating internal call forwarding
Internal call forwarding can only be activated if a forwarding destination exten- sion has been configured.
1.Press for selection menus.
2.Select using [] and [OK]: Service Set up → Int.forwarding → Activate or Deactivate
Defining the number of ring cycles
Ring delay is used to define the number of ring cycles to be completed before a call is forwarded. Between 0 to 9 ring cycles can be configured.
1.Press for selection menus.
2.Select using [] and [OK]: Service Set up → Int.forwarding → No. of Rings
3.Enter the number of ring cycles and confirm with [OK].
External call forwarding - CF
Both telephone lines assigned to your ISDN connection are free during call for- warding. If call forwarding is configured, it is activated at the provider exchange. The call is not signalled at your telephone. You must pay the connection costs together with a surcharge. You can define the following conditions for call for- warding:
Immediately — On busy — On no reply
Configuring a new call forwarding destination
1.Press for selection menus.
2.Select using [] and [OK]: Service Set up → Ext. Call Forw.3.Select using [] and [']: (required call forwarding).
4.Select using [] and [OK]: New entry → (MSN for which
call forwarding should apply) → Immediately, On busy or On no reply.5.Enter the required destination call number and confirm with ['].
6.Select using [] and [OK]: Save entry.
7.Confirm the prompt with [YES]: Call forwarding is activated.
or 7. | Confirm the prompt with [NO]: Call forwarding is not activated. |
Activating/deactivating external call forwarding
1.Press for selection menus.
2.Select using [] and [OK]: Service Set up → Ext. Call Forw.
3.Select using [] and [']: (required call forwarding).4.Select using [] and [OK]: Activate or Deactivate
32