Siemens 3070 Using the keypad protocol, Activating/deactivating the dialling of * and #, Appendix

Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01

Appendix

Step

by

Step

Using the keypad protocol

Under CENTREX, the keypad protocol enables additional services from other providers to be used, e.g voicemail or announcement services.

Contact your provider for more information on keypad control.

Activating/deactivating automatic keypad switchover

Pressing ’*’ and ’#’ automatically switches the system over to the keypad pro- tocol. The following dialling codes are transmitted to the exchange as keypad character sequences. If automatic keypad switchover is deactivated, dialling ’*’ and ’#’ has no effect.

1.Press  for selection menus.

2.Select using [ˆ] and [OK]: Service Set up → Settings → System settings → Spec. function → Dial properties → Auto Keypad.

The activated automatic keypad switchover is highlighted.

Activating the keypad protocol during a call only

This setting only applies to the external call currently in progress.

1.Press  for the menu.

2.Select using [ˆ] and [OK]: Keypad On

The activated keypad function is automatically reset when the call is ended.

Activating the keypad protocol for the current connection

You can switch to the keypad protocol for the duration of the next call.

1.Press  for selection menus.

2.Select using [ˆ] and [OK]: Service Set up → Call preparat. → Temp. Keypad.

Activating/deactivating the dialling of * and #

This function is important for using telecom features, e.g. querying an answer- ing machine in the telecom network.

1.Press  for selection menus.

2.Select using [ˆ] and [OK]: Service Set up → Settings → System settings → Spec. function → Dial properties → Dial * and #.

Activated dialling of * and # is highlighted.

56