Gigaset 3070/3075isdn, GB, | giga3070KAP.fm | 09.01.01 |
Operation with the entrance telephone
Step
by
Step
Operation with
the entrance telephone
Configuring the entrance telephone
1.Press for selection menus.
2.Select using [] and [OK]: Service Set up → Settings → Set up user →
Set up device.
3.Select using [] and [']: (required internal subscriber 21 or 22).4.Select using [] and [OK]: Device select. → Door*.
Assigning internal users to the entrance telephone call group
1.Press for selection menus.
2.Select using [] and [OK]: Service Set up → Settings → Set up user →
Set up device.
3.Select using [] and [']: (required internal subscriber).
4.Select using [] and [OK]: Door call grp..
Forwarding the entrance telephone externally
All entrance telephone calls can be forwarded to an external call number.
Entering/modifying a destination call number for external call forwarding
1.Press for selection menus.
2.Select using [] and [OK]: Service Set up → Settings → Set up user →
Set up device.
3.Select using [] and [']: (required internal subscriber).
4.Select using [] and [OK]: Forw.entr.tel..
5.Select using [']: (destination call number).If a destination call number has not yet been stored, the entry <blank> is dis- played.
6.Select using [] and [OK]: Change number.
7.Enter the new or modified destination call number and confirm with ['].
8.Select using [] and [OK]: Save entry.
Deleting a destination call number for external call forwarding1.Press for selection menus.
2.Select using [] and [OK]: Service Set up → Settings → Set up user →
Set up device.
3.Select using [] and [']: (required internal subscriber).
4.Select using [] and [OK]: Forw.entr.tel..
5.Select using [']: (delete number).
6.Select using [] and [OK]: Delete number.
*. This configuration is only applicable for entrance telephones in accordance with FTZ (door opener via ring current). Telephones with DTMF control must be programmed like normal telephones.
66
