Siemens 75 Emergency numbers, Configuring new emergency numbers, Restoring the factory setting

Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01

Security settings

Step

by

Step

Emergency numbers

Two or three emergency numbers (country-specific) are entered at the base station. Five additional emergency numbers can be added to the following po- sitions. The first position in the list is assigned the Siemens Hotline for your Gi- gaset 3070isdn/3075isdn as standard. This preset can be overwritten.

Configuring new emergency numbers

1.Press  for selection menus.

2.Select using [ˆ] and [OK]: Service Set up → Settings → Security.

3.Enter the base PIN and confirm with [OK].

4.Select using [ˆ] and [OK]: Emergency Nos. → <no entry>.

5.Confirm ['].

6.Select using [ˆ] and [OK]: Change number.

You can also delete or display an emergency number in this supplementary menu.

7.Enter the new emergency number (max. 32 digits) and confirm ['].

8.Select using [ˆ] and [OK]: Save entry.

You can also add a number from the directory to this supplementary menu as an emergency number, or use a provider number (if supported).

Dialling an emergency number with active DSS and/or base/telephone lock

The [EMERG.] softkey is displayed when DSS/telephone lock is active, see your handset operating instructions.

1.Press any key or D.

2.Confirm EMERG.

3.Enter the emergency number.

Restoring the factory setting

You can reset the station to the factory setting. The handsets remain regis- tered.

1.Press  for selection menus.

2.Select using [ˆ] and [OK]: Service Set up → Settings → System settings →

Spec. function → Default Reset.

3.Enter the system PIN of the base station (factory setting: 0000) and confirm

with [OK].

4.Select using [ˆ] and [OK]: Reset all.

5.Confirm prompt with [YES].

53