Siemens 3070 Entrance telephone, Displaying call charge and call duration, Call charge display

Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619 giga3070KAP.fm 09.01.01

System functions

Step

by

Step

Entering an automatic start/end time for night service

1.Press  for selection menus.

2.Select using [ˆ] and [OK]: Service Set up → Night Service → → Start time or End time.(required MSN)

3.Enter start time or end time (4 digits) and confirm with ['].

4.Select using [ˆ] and [OK]: Save entry.

Activating/deactivating all-day night service for Saturday/Sunday

1.Press  for selection menus.

2.Select using [ˆ] and [OK]: Service Set up → Night Service → (required MSN) → Sat/Sun all day.

Activating/deactivating night service

1.Press  for selection menus.

2.Select using [ˆ] and [OK]: Service Set up → Night Service → (required MSN) → Activate or Deactivate

Entrance telephone

See separate section: "Operation with the entrance telephone" on page 66.

Displaying call charge and call duration

Call charge display

You can use call charge display if you have registered with your provider for "Call charge display during a call".

The units/total charges accumulated and the cost of the last call completed can (depending on programming) be checked using your comfort handset. The total cost includes the charges incurred by the handset.

Activating/deactivating call duration display

If this feature is activated, the call duration is displayed for outgoing and incom- ing calls, for enquiry calls and for three-way calling.

1.Press  for selection menus.

2.Select using [ˆ] and [OK]: Service Set up → Settings → System settings → Cost/duration.

3.Enter the base PIN and confirm with [OK].

4.Select using [ˆ] and [OK]: Call display → Call Duration.

Activating/deactivating unit/charge display

1.Press  for selection menus.

2.Select using [ˆ] and [OK]: Service Set up → Settings → System settings → Cost/duration.

3.Enter the base PIN and confirm with [OK].

4.Select using [ˆ] and [OK]: Call display → Units/Costs.

40