First Steps
Operating displays and connections
Front panel
LED displays
The front panel of the Gigaset Router contains LED displays that show the operating state and simplify installation and fault finding in the network.
The LEDs show the following:
LED | State | Status |
|
|
|
PWR | On | The Gigaset Router has been switched on. |
WLAN | On | The Gigaset Router is ready to open wireless connections. |
WAN | On | The WAN connection has established a valid network |
|
| connection. |
|
|
|
| Flashing | The WAN connection is sending or receiving data (traffic). |
Link/ACT | On | The LAN connection has established a valid network |
|
| connection. |
|
|
|
| Flashing | The LAN connection is sending or receiving data (traffic). |
Speed | On | The LAN connection is running at 100 Mbps. |
| Off | The LAN connection is running at 10 Mbps. |
10