Siemens SE105 Network configuration with Windows XP, Configuring the network, Configuring the local network

Configuring the local network

To integrate a PC in a network with Windows XP via a Gigaset Router:

1.Configure the network (see below).

2.Select computer names and workgroup (see page 29).

3.Check the network settings and complete the installation procedure (see page 29).

4.Make TCP/IP protocol settings (see page 30).

5.Deactivate the http proxy (see page 33).

Configuring the network in this case means selecting Internet connection as the connection method. You can do this with the network wizard.

◆Select Start – Control Panel.

◆Select Network and Internet Connections.

◆Now select Set up or change your home network or small office network.

This launches the network wizard.

◆Skip the welcome screen and the checklist by clicking on next each time.