Gigaset Router User Interface
Working area
Use the working area for configuration.
With configurable parameters you will see a dialogue box or selection list with default settings. There may be some limitations on the possible entries, e. g. entering special characters or certain value ranges. If your entry does not meet the rules for the box in question, you will see an error message. You can then repeat the input.
Once you have made any configuration changes on a page, you can activate the new setting by clicking on APPLY or NEXT at the bottom of the page.
Please read the following information if you are using Internet Explorer 5.0.
Once you have entered the command, the page will be properly updated i if you have configured Internet Explorer as follows:
In Extras – Internet options – General – Temporary Internet files – Settings the setting for Check for newer versions of the saved pages should be set to For every visit to the page.
Buttons |
|
|
Basic Setup | NEXT | Opens the page for the next configuration step. |
| BACK | Returns to the previous configuration step. |
| CANCEL | Deletes all the entries on page since the last time it was |
|
| opened. |
| FINISH | Transfers the settings you have made to the router |
|
| configuration. |
| HELP | Displays help information about the current page. |
Advanced | APPLY | Transfers the settings you have made to the router |
Setup: |
| configuration. |
| CANCEL | Deletes all the entries on page since the last time APPLY |
|
| was run. |
| HELP | Displays help information about the current page. |
Other buttons may be visible depending on the function in question. These are described in the relevant sections.
48