Siemens SE105 Network configuration for Windows 98, 98 SE, ME, Configuring the local network, Setting up a PC as Client for Microsoft Networks

Configuring the local network

Network configuration for Windows 98, 98 SE, ME

To integrate a PC with Windows 98, 98 SE or ME in a local network via a Gigaset Router:

1.Set up the PC as Client for Microsoft Networks (see below).

2.Select computer names and workgroup (see page 19).

3.Install the TCP/IP protocol (see page 20).

4.Make TCP/IP protocol settings (see page 21).

5.Deactivate the http proxy (see page 25).

6.Synchronise the TCP/IP settings with the Gigaset Router (see page 26).

Setting up a PC as Client for Microsoft Networks

Before the PCs on your network can work together, you have to configure them as Microsoft Network Clients. This can be done as follows:

◆Click on Start – Settings – Control Panel.

◆Double click on the Network icon and then open the Network tab in the Configuration window.

◆Check whether the list of components contains the entry Client for Microsoft Networks.

◆If it is not there click on Add.

◆Select as network component type Client and click on Add.

18