The Gigaset Router

Procedure for installation and configuration

1.First install an Ethernet network card or a wireless Network adapter such as the Gigaset USB Adapter 11 or Gigaset PC Card 11 in the PCs you want to connect with the Gigaset Router. The installation procedure can be found in the product's User Guide.

 

When installing wireless network adapters you should note the

i

following:

The factory-set SSID of the Gigaset SE105 dsl/cable is

 

 

ConnectionPoint.

 

 

2.Then install the router (see page 13).

3.Before the PCs can communicate with the router and with each other in a local network, you have to change their network settings. Configure these network settings on one PC first so that it can establish a connection to the router. You can then use that PC to configure the router (see page 17).

4.In a wireless connection you establish the link from the PC's wireless network adapter to the router. This is described in the network adapter's operating instructions.

5.Configure the router so that the router's WAN socket can be used (see page 44). This will require the access data from your Internet Service Provider.

6.If you want to connect more PCs to the router, configure their network settings and set up the local network (see page 17).

7.If you want to use the router's other functions, , e. g. the comprehensive security functions, use the router's Advanced Setup (see page 59).

8