First Steps

Connecting the Gigaset Router

◆Only use the (9V 1A) power supply unit supplied with the router.

◆Do not plug any phone jack connectors into the router WAN and LAN

!sockets.

◆Use standard network cables for all connections (CAT-5) for the WAN and LAN connections.

◆An Ethernet cable must not be longer than 100 meters (328 feet).

Before you start connecting PCs to your Gigaset Router make sure that

◆a wired or wireless Network adapter is connected to the PC. Please read the operating instructions that came with the adapter.

◆ ConnectionPoint has been entered as SSID on the network adapter.

Connecting a DSL or cable modem to the router

Connect the socket on the back of the router marked WAN and your DSL or cable modem with an Ethernet cable.

Gigaset SE 105 dsl/cable

DSL or cable modem

Use a 100-Ohm shielded or unshielded 3, 4 or 5 category Ethernet cable with RJ-45 jacks on both ends for all connections.

i Please bear in mind that the cable you use must be the right one for the

modem (straight or crossed wiring). Please consult your modem operating instructions. The Ethernet cable supplied has straight wiring.

13