Configuring the local network
Synchronising the TCP/IP settings with the Gigaset Router
You have now configured your computer so that it is ready to be connected to the Gigaset Router. You now have to release the old TCP/IP settings and update them with the settings of your Gigaset Router.
◆Click on Start in Windows Desktop and then Programs, followed by Accessoires and finally command prompt.
◆In the command prompt window enter the
ipconfig /release command and press the ENTER KEY.
◆Then enter the
IPCONFIG /RENEW command and press the ENTER KEY.
If the router's default IP address (192.168.2.1) was not changed, the IP address should now read 192.168.2.x (with x being a number between 2 and 254. The Subnet mask must always be 255.255.255.0 and the Default Gateway must have the router's IP address (192.168. 2.1). These values confirm that your Gigaset Router is working.
◆Enter EXIT and press the Enter Key to close the command prompt window.
34