Configuring the Advanced Settings

Super G (108 Mbit/s)

With the aid of channel bundling, the Super G transmission mode enables wireless data transfer up to 108 Mbps. The channel for wireless data transfer cannot be changed. You can only use Super G if this function is supported by at least one client in your wireless network. For the best possible data transfer rates, all clients in your LAN should support Super G.

Please remember:

If you activate Super G as the transmission mode, but it is not supported by all components in your wireless network, then for technical reasons the transfer rate in the network may be significantly lower than the possible maximum of 108 Mbit/s.

ìSelect the mode for using Super G (108 Mbit/s) for your wireless network to incre- ase the data transmission speed. You have a choice of two modes.

–Static: Wireless transmission is at a rate of just 108 Mbps. Clients that do not support this speed cannot connect to Access Point.

–Dynamic: If you select this transmission mode, the router accepts subscribers that communicate at different transfer rates and adjusts to the slowest client in the network.

ìIf you do not wish to use Super G (108 Mbit/s), select Disabled in the selection menu.

XR (extended range)

Activating XR enables data transfer even in the peripheral areas of your wireless net- work, albeit at very low data transfer rates. Conversion to XR mode occurs automatically when the signal is weak enough and if the partner station is also XR capable.

ìActivate or deactivate XR for your wireless network to increase the range.

ìClick on OK to apply the settings.

100