Configuring the Advanced Settings

Setting up the NAT function

Your Gigaset SE551 WLAN dsl/cable comes provided with the NAT (Network Address Translation) function. With Address Mapping, several users on your local network can access the Internet via one or more public IP addresses. In the default setting, all the local IP address are mapped to your router's public IP address.

One feature of NAT is that data from the Internet is not allowed into your local network unless it has been explicitly requested by one of the PCs on that network. Most Internet applications run behind the NAT firewall without any problems. If you request Internet pages, for example, or send and receive e-mails, the request for data from the Internet comes from a PC on the local network and so the router allows the data through. The router opens exactly one port for the application. A port is an internal PC address through which the data is exchanged between a server on the Internet and a client on a PC in the local network. Communicating via a port follows the rules of a particular protocol (TCP or UDP).

If an external application tries to send a call to a PC within the local network, the router will block it. There is no open port via which the data could enter the local network.

Some applications, such as games on the Internet, require several links, i.e. several ports so that the players can communicate with each other. In addition, these applications must also be permitted to send requests from other users on the Internet to the user on the local network. These applications cannot work if Network Address Translation (NAT) has been activated.

Using port forwarding (the forwarding of requests to particular ports) you make the router forward requests from the Internet for a certain service, e.g a game, to the appropriate port or ports on the PC on which the game is running.

Port triggering is a specific variant of port forwarding. Unlike port forwarding, in this case the Gigaset SE551 WLAN dsl/cable forwards data from the set port block to the PC which has previously sent data to the Internet via a certain port (trigger port). This means that approval for the data transfer is not tied to one specific PC in your network, but only to the port numbers of the required Internet service.

Where configuration is concerned, this means:

uYou have to define a so-called trigger port for the application and also the protocol (TCP or UDP) that this port uses. Then you assign to this trigger port the public ports that have to be opened for the application.

uThe router checks all outgoing data for the port number and protocol. If it recognises a match of port and protocol to a defined trigger port, then it will open the assigned public ports and notes the IP address of the PC that sent the data. If data comes back from the Internet via one of these public ports, it allows the data through and directs it to the right PC. A trigger event always comes from a PC within the local network. If a trigger port is addressed from outside, it is simply ignored by the router.

88