Siemens SE551 QoS, PHB, for the, Activate, Priority, Click on, Select the, Upstream rate, and for the line, Allocated bandwidth, In the field next to

Configuring the Advanced Settings

QoS (Quality of Service)

Many communication and multimedia applications require high speed and large bandwidths to transfer data between the local network and the Internet. However, for many applications there is often only one Internet connection with limited capacity available. QoS (Quality of Service) divides this capacity between the different applications and provides undelayed, continuous data transfer where data packets with higher priority are given transmission preference.

ìIn the Advanced Settings – Internet menu, select the entry QoS.

ìActivate Differentiated services, i.e. the prioritisation of certain services for data transfer between your network and the Internet.

ìIn the field next to Upstream rate, enter the value for your DSL connection. The value is determined in the contract with your Internet provider

You can determine via Priority which data packets are to be given preferential transmis- sion. With the aid of PHB (Per Hop Behaviours) a decision is also made about whether data packets are to be forwarded immediately before all others (EF, Expedited Forward- ing), guaranteed and without data loss (AF, Assured Forwarding) or normally (BE, Best Effort). If your application already supports QoS your application will determine the priority automatically, and this will be noted by your device for forwarding. In addition, your device recognises certain Predefined applications and gives each data packet the relevant priority. You can also determine which proportion of the bandwidth for your Internet connection is to be made available for a certain class as Allocated bandwidth.

ìSelect the Allocated bandwidth for the Predefined applications and for the line (all other applications).

ìClick on OK to save and apply the changes.

95