Siemens SE551 Add network components, Installing network services, Configuring the local network, ìClick on Start – Settings – Control Panel

Configuring the local network

Network configuration with Windows 2000

To integrate a PC with Windows 2000 into a network that is configured with a Gigaset SE551 WLAN dsl/cable you must carry out the following steps:

1.Install the network services (see below).

2.Select computer names and workgroup (see page 34).

3.Install the TCP/IP protocol (see page 35).

4.Make TCP/IP protocol settings (see page 37).

5.Deactivate the http proxy (see page 39).

6.Deactivate the popup blocker (for Mozilla Firefox only, see page 39)

7.Synchronise the TCP/IP settings with the Gigaset SE551 WLAN dsl/cable (see page 40).

Installing network services

You have to install the network services before the PCs in your network can access shared resources. This is done as follows:

ìClick on Start – Settings – Control Panel.

ìDouble-click on the Network and dial-up connections icon.

ìIn the left-hand pane click on Add network components.

33