Handset settings

Please note:

–If Bluetooth is activated and accessories (e.g. data cables page 66) are plugged into the connection socket (page 1), Bluetooth is automatically deactivated.

–If a Bluetooth voice connection has already been established, Bluetooth is not deactivated until it is ended.

–If a Bluetooth data connection has already been established, the response depends on the receiving device.

–Bluetooth is automatically reactivated when the accessories are removed.

–If Bluetooth is deactivated and accessories are plugged in, then Bluetooth cannot be activated.

Registering Bluetooth devices

The distance between the handset in Blue- tooth mode and the activated Bluetooth device (headset or data device) should be no more than 10 m.

Please note:

–If you register a headset, any headset that is already registered will be overwritten.

–If you would like to use a headset with your handset that is already registered to another device (e.g. to a mobile phone), please deactivate this connection before you start the registration process to Gigaset.

w¢í¢Data Transfer ¢Bluetooth ¢Search Headset / Search Data Device

The search can take up to 30 seconds.

Once the device has been found, its name will be shown on the display.

§Options Press the display key. Trust Device Select and press §OK§.

~Enter the PIN for the Bluetooth device you want to register and press §OK§.

The device is saved in the list of known devices.

Cancelling/repeating current search

To cancel search:

Cancel Press the display key. Repeat search if necessary:

§Options Select and press §OK§.

Repeat Search

Select and press §OK§.

Editing the list of known (trusted) devices

Open list¢ Data Transfer¢Bluetooth
w¢í
¢Known Devices

 

A corresponding icon appears next to each device name in the list displayed:

Icon Meaning

ôBluetooth headset

õBluetooth data device

Viewing entries

Open list ¢s(select entry)

§Options Press the display key.

View Entry Select and press §OK§.

Device name and address are displayed.

Back with §OK§.

De-registering a Bluetooth device Open list ¢s(select entry)

§Options Press the display key. Delete Entry Select and press §OK§.

aBack: press and hold key.

Please note:

If you de-register an activated Bluetooth device, it may try to reconnect as an "unregis- tered device".

Changing the name of a Bluetooth device Open list ¢s(select entry)

§Options Press the display key.

Rename Select and press §OK§.

~Change name

Save

Press the display key

aBack: Press and hold key.

56