Handset settings

The room monitor will use all the handsets that are in walky-talky mode.

Switch the room monitor off by pressing the display key §OFF§ on the handset that was used to activate the room monitor.

The handset reverts to normal walky-talky mode.

Handset settings

Your handset is preconfigured, but you can change these settings to suit your individual requirements.

Shortcuts for functions and numbers

You can assign the left display key and each of the digit keys Qand 2to Oa number or a function. The right display key has a function pre-selected by default. You can change the assigned function.

The number is then dialled or the function started by simply pressing a key.

Assigning a digit key/left display key

Precondition: The digit key or the left display key has not yet been assigned a number or a function.

¤Press the display key }or press and hold the digit key.

The list of possible key assignments is opened. The following can be selected:

Quick Dial / Call-by-Call

Assign key to a number from the directory or call-by-call list.

The directory or call-by-call list is opened.

¤Select an entry and press §OK§.

If you delete or edit an entry in the directory or call-by-call list, this has no effect on the assignment to the digit/ display key.

Room Monitor

Assign key to the menu for setting and activating the room monitor (see page 46).

Alarm Clock

Assign key to the menu for setting and activating the alarm clock (see page 53).

Calendar

Open calendar/enter new appoint- ment.

Bluetooth

Assign the Bluetooth menu to a key.

More Features...

More features are available:

INT

Internal calls (see page 44).

SMS

Assign the menu for SMS functions to a key (see page 28).

SMS Service

Assign key with the menu for ordering info services (page 33).

SMS Notific.

Assign key with the menu for activating SMS notification (page 31).

If the left display key has been assigned a shortcut, the selected function or name of the phone number in the directory or call- by-call list is displayed (abbreviated if nec- essary) in the bottom display line via the display key.

Starting the function, dialling the number

If the handset is in idle status, press and hold the digit key or press the display key briefly.

Depending on the key assignment:

uNumbers are dialled directly. u The function menu is opened.

48