Connecting the base station to the PABX

The following settings are only necessary when your PABX requires them; see the PABX user guide.

You cannot send or receive SMS messages on PABXs that do not support Calling Line Identification.

Dialling modes and recall

The current setting is indicated by ‰.

Changing the dialling mode

The following dialling modes can be selected:

u Tone dialling (DTMF) u Pulse dialling (DP)

w¢Ð¢Base ¢Add. Features ¢Dialling Mode

sSelect dialling mode ( ‰ = on) and press §OK§.

aPress and hold (idle status).

Setting recall

¢ ¢ ¢

w¢ Ð Base Add. Features

Recall

sSelect recall ( ‰ = on) and press §OK§.

aPress and hold (idle status).

Connecting the base station to the PABX

Saving an access code (outside line code)

Precondition: You may have to enter an access code for external calls in your PABX, e.g. "0".

¢w¢Ð¢ Base ¢Add. FeaturesAccess Code

~ Enter or change access code, max. 3 digits.

¤ Save changes: (page 65).

If an access code has been saved,

uThe access code is prefixed automati- cally when you select from the follow- ing lists: numbers of the SMS centres, call history or answer machine list.

uThe access code must be entered when dialling manually and when manually entering directory, emergency/ quick dial numbers and SMS centre numbers.

uIf you copy recipient's number from the directory when sending a SMS, you have to delete the access code.

uYou delete an existing access code with X.

59