Answer machine operation (Gigaset SL375 only)
Call acceptance/charge saving function for remote operation
You can set when you want the answer machine to accept a call.
The options are: 0 sec., after 10 sec., 18 sec. or 30 sec. and the
In Automatic mode, the following applies for call acceptance:
uIf there are no new messages, the answer machine accepts a call after 18 seconds.
uIf new messages are present, the answer machine accepts a call after 10 seconds.
When operating remotely you can tell after approx. 15 seconds that there are no new messages (otherwise the answer machine would already have accepted your call). There will be no call charges if you hang up now.
w¢Ð¢Voice Mail ¢Ring Delay
rSelect 0 sec. / 10 sec. / 18 sec. / 30 sec. / Automatic.
§Save§ Press the display key.
aPress and hold (idle status).
Setting the recording time
You can set the maximum recording time of a message. The options are: 1, 2, 3 mins or Maximum.
w¢Ð¢Voice Mail ¢Message Length
rSelect recording time.
§Save§ Press the display key.
Setting the recording quality
Set the quality you require for your record- ings. The options are: Standard, High, Excellent . If the quality is higher, the maximum recording time is reduced.
w¢Ð¢Voice Mail ¢Record Quality
rSelect the recording quality.
§Save§ Press the display key.
Resetting fast access for the answer machine using key 1
By factory default, the integrated answer machine is set for fast access. However, if you have set the network mailbox for fast access (page 42), you can reset this set- ting.
w¢Ð¢Voice Mail ¢Set Key 1 Answer Machine / Network Mailb.
Select and press §OK§.
aPress and hold (idle status).
After you have selected the network mailbox or the answer machine, press and hold key . You will be connected directly.
The setting for fast access applies to all Gigaset SL37H handsets.
Operating when on the move (remote control)
You can check or activate the answer machine from any other telephone (e.g. hotel, pay phone) or initiate ringback from the answer machine with a SMS.
Preconditions:
uYou have set a system PIN other than 0000 (page 58).
uThe phone you are using for remote operation has touch tone dialling (DTMF), i.e. you hear different tones when you press the keys. Alternatively, you can use a code transmitter (availa- ble from your mobile phone retailer).
40