Base station settings

Base station settings

The base station settings are carried out using a registered Gigaset SL37H handset.

Protecting against unauthorised access

Protect the system settings of the base station with a PIN known only to yourself. The system PIN must be entered when, for example, registering/de-registering a handset to/from the base station or when restoring the default settings.

Changing the system PIN

You can change the 4-digit system PIN set on the base station (default setting: 0000) to a 4-digit PIN known only to yourself.

Gigaset SL375: Setting a system PIN facilitates remote operation of the answer machine (page 40).

w¢Ð¢Base ¢System PIN

~Enter the current system PIN and press §OK§.

~Enter new system PIN. For security the PIN is shown as

four stars (****).

s~ Jump to the next line, re-enter new system PIN and press §OK§.

aPress and hold (idle status).

Resetting the system PIN

If you have forgotten your system PIN you can reset the base station to the original code 0000:

Disconnect the power cord from the base station. Hold down the registration/pag- ing key ÷on the base station while reconnecting the power cable to the base station. Release the key after a time.

The base has now been reset and the system PIN 0000 set.

Activating/deactivating music on hold

w¢Ð¢Base ¢Music on hold

Press §OK§ to activate or deactivate music on hold ( ‰ = on).

Repeater support

With a repeater you can increase the range and reception strength of your base sta- tion. You will need to activate repeater mode. This will terminate any calls that are in progress at the time.

Precondition: A repeater is registered.

Eco mode is disabled.

w¢Ð¢Base¢Add. Features
¢Repeater Mode

 

§Yes§

Press the display key.

When repeater mode is active, the menu item is marked with ‰.

Please note:

Repeater support and eco mode (see page 12) cancel each other out, i.e. both functions cannot be used at the same time.

Restoring the base station to the factory settings

When the settings are restored

ueco mode is disabled,

uhandsets are still registered, u the system PIN is not reset,

uthe SMS information services are not reset.

¢Ð¢Base ¢Base Resetw

~Enter the system PIN and press

§OK§.

§Yes§ Press the display key.

Cancel the restoring process by pressing aor the display key §No§.

aPress and hold (idle status).

58