Range and reception strength

Range:

uOutdoors: up to 300 m u Indoors: up to 50 m

The range is reduced when eco mode is on (see page 12).

Reception strength:

The display shows the quality of the radio contact between the base station and handset:

uGood to poor: Ð i Ñ Ò u No reception: flashes

Connecting the base station

¤ First connect the mains unit and then the phone jack as shown below and place the cable in the cable channels.

12

3

1

1Underside of the base station (detailed view)

2Mains adapter 240 V

3Phone jack with phone cord

Please note:

uThe mains adapter must always be connected, as the phone will not oper- ate without mains connection.

uOnly use the mains adapter and phone cord supplied.

First steps

uIf you buy a replacement phone cord, make sure that the phone jack has the correct type of wiring.

Correct phone jack assignment

3

 

 

 

4

1 unused

2

 

 

 

 

 

 

5

2 unused

1

 

 

 

 

 

 

6

3 a

 

 

 

 

 

 

 

 

 

 

 

 

4 b

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5 unused

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6 unused

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Setting up the handset for use

The display is protected by a plastic film.

Please remove the protective film!

Fitting the battery pack

Warning:

Only use the rechargeable Siemens original battery pack (page 63)! Never use a conventional (non-rechargeable) battery or other battery types as this could result in significant health risks and personal injury. For example, the batteries could explode. The phone could also malfunction or be damaged as a result of using batteries that are not of the recommended type.

¤With the pins to the front, insert the battery pack into the cavity at an angle from the left.

¤Then press it into the housing from above until the bracket on the side of the battery back snaps securely into the housing.

7