Divert55
You can set the conditions for which calls are diverted to your mailbox or other numbers.
0HQX Î Divert
All calls
All calls are diverted.
SSymbol in top line of the display in standby mode.
Set divert
Example: The most common condition for forwarding is:
Unanswered
This and other conditions (see box) are set in the same way:
0HQX Î Divert Î Unanswered Î Set
Enter the phone number to which a call will be diverted (if not done already), and confirm with 2..
or
Displays the Addressbook or mailbox, to select the number to which a call will be diverted.
After a short pause the setting is confirmed by the network.
Unanswered
This setting covers the most important conditions: (see also below)
If not reachable
If no reply
If busy
Specific divert
If not reachable
Divert if the phone is switched off or out of range.
If no reply
A call is only diverted after a delay. The period can be set by the user to a maximum of 30 seconds in 5 second intervals.
If busy
Divert if a call is in progress.
If “Call waiting“ is activated (see
p. 64) you will hear the call waiting tone (see p. 15) even if the “If busy“ diversion has been set.
Receiving fax
Fax calls are diverted to a phone number with a fax connection.
Receiving data
Data calls are diverted to a phone number with a PC connection.
