|
|
| Setup | 61 |
|
|
|
|
|
| |
|
|
|
|
|
|
| 0HQX Î Setup Î | Network |
|
| |
|
| Security Î |
|
|
|
then select a function:
PIN control
The PIN is usually requested each time the phone is switched on. You can deactivate this feature but you risk unauthorised use of the phone. Some Service Providers do not permit this function.
Prevent new SIM
(Phonecode)
Your phone is prevented from operating with a different SIM card.
Pin change
PIN 1
You can change the PIN to any
4 - 8 digit number (i.e . a number you may find easier to remember).
+Enter old PIN.
2. Press.
+/ 2. Enter new PIN.
+/ 2. Repeat new PIN.
PIN 2
You can change the PIN 2 to any
Proceed as with PIN 1.
Phonecode
You can also change the phone code to any 4 - 8 digit number. Proceed as with PIN 1.
0HQX Î Setup Î Network Î
then select a function:
Connection_
This function is only displayed if it is supported by the Service Provider.
Two independent phone numbers must be registered on the phone.
Select
Select the phone number to be used.
If you change frequently, it is more convenient to make the selection using the soft key (see p. 65).
-Display the active phone number.
Special settings can be made for each phone number (melody, call diversion etc). Switch to the required phone number first.
To switch the phone number/line: (in standby mode)
Press, then:
/LQH Press.
Lock
(Phonecode)
You may limit usage to one phone number.
