8

Battery

Insert battery

Insert battery at the bottom of the

phone nand press inward until it clicks into place o.

o

n

Switch off the phone before you remove the battery.

Unlock battery o, then remove n.

Charge battery

The battery is not fully charged when delivered, so:

o

n

Interconnect the socket and the Sync Station n with the plug-in power supply.

Insert the phone into the Sync Stationoand press downward until it engages. The contact mes- sage is displayed (alternatively: plug in power supply directly to the phone).

￿The voltage indicated on the Sync Station must not be exceeded.

Charging

The charger heats up when used for long periods. This is normal and not dangerous.

5When charging is in progress.

FEnd of charging

An empty battery is fully charged after about 2 hours. Charging is only possible in an ambient temperature of 5°C to 40°C (the charge icon flashes as a warning when the temperature is 5°C above/below).

Usage time

A fully charged battery provides 60 to 170 hours of standby time or 1½ to 4 hours of talk time. The standby times/talk times are average values; the actual values depend on the operating conditions (see table below).

Charge level display:

Fully BC DEmpty charged

A beep sounds when the battery is nearly empty.

Operation

Time

Decrease of

carried out

(min)

standby time

Calling

1

30

- 60 min.

Playing music

30

20

- 30 h.

Display

½

30 min.

backlight*

 

 

 

Network search

1

5 - 10 min.

*Key input, games, organizer etc.

Page 10
Image 10
Siemens SL45 manual Battery, Insert battery, Charge battery, Charging, Usage time