64Setup
During calls
0HQX Î Setup Î During calls Î
then select a function:
Call waiting | _ |
If you are registered for this service, you can check whether it is set and activate or deactivate it (see also p. 15).
Conceal ID | _ |
When you make a call, your number appears on the recipient's display (depending on the Service Provider).
To suppress this display, you may activate “Conceal ID“ mode for the next call or all subsequent calls. You may need to register separately with your Service Provider for these functions.
Minute Beep
During a call you hear a beep after every minute as a reminder of the time elapsed.
Headset
0HQX Î Setup Î
Headset
Calls are automatically accepted after the 3rd ring when the stereo headphones are connected. You should continue wearing the headphone.
Switch to handset during a call (if the phone is connected to the
Activate and deactivate.
Car use
0HQX Î Setup Î In the car
If the phone is connected to an original Siemens car kit, the following functions can be activated/ deactivated:
Auto Answer
Calls are accepted after the 3rd ring if the phone is connected to an original Siemens car kit. Depending on the setup, the ignition may need to be switched on.
Factory default: On.
Indication on the display.
Aut. power off
The phone is powered by the car's power supply. The time between switching off the ignition and deactivation of the phone can be adjusted. Factory default: 2 hours.
Automatic settings:
Permanent illumination: Switched on
Auto key lock: Switched off
IrDA
Activate/deactivate infrared data transmission.
