During the programmed playback the notice PROGRAM appears in the display. To delete the programmed playback press twice, during playback, the STOP button on the front panel of the DVD player or on the remote control.
Note:
If you are not sure what number a title and/or chapter to be programmed has then select the corresponding chapter, during playback of the film, with the
buttons SKIP FWD 
and SKIP BWD 
and susequently press the DISPLAY button on the remote control to superimpose all information from the inserted DVD/VCD/
On this topic see also the section "Superimpose disc information".
Superimpose disc information
Note:
This function may not be available on all
to execute a function that is not available, the symbol 
is displayed on the television screen.
With this function you can superimpose all the available information from a
•For this, during playback, press the DISPLAY button on the remote control. On the television screen will be superimposed:
With DVDs:
•the current title number/the total number of titles
•the current chapter number/the total number of chapters
•the played back so far time in hours, minutes and seconds (TITLE ELAPSED)
•the time to the end of the film in hours, minutes and seconds
(TITLE REMAIN)
•the played back so far time of the chapter in hours, minutes and seconds
(CHAPTER ELAPSED)
•the time to the end of the chapter in hours, minutes and seconds
(CHAPTER REMAIN)
With VCDs/S-VCDs:
•the current title number/the total number of titles
•the played so far time of the current playback title on the VCD/SVCD in hours, minutes and seconds (SINGLE ELAPSED)
•the time to the end of the currently playing back title in hours, minutes and seconds (SINGLE REMAIN)
To stop display of the disc information press repeatedly the DISPLAY button until the notice DISPLAY OFF appears on the television screen.
TITLE | Select TITLE to continuously repeat the currently playing | |
| back title until repeat playback is switched off or playback | |
| is cancelled by pressing the STOP | button twice. |
ALL | Select ALL to continuously repeat all available titles on the | |
| disc, thus the entire disc, until playback repeat is switched | |
| off or playback is cancelled by pressing the STOP button | |
| twice. |
|
RANDOM | Select RANDOM to play the titles on the disc in a random | |
| order. This setting is available only when playing audio CDs. | |
To switch off repeat or random playback, during playback press repeatedly the REPEAT button until no further displays appear on the television screen.
Repeat function with MP3/WMA/MPEG/ JPEG/Xvid discs
During playback press the REPEAT button several times to apply the following repeat functions (the set function appears in the display):
REPEAT ONE
Endless repeat of the current title/image.
REPEAT FOLDER
Repeat the current folder. If a folder structure is not available all titles/images on the disc and/or data carrier will be repeated.
RANDOM
Random playback of the titles on the disc and/or the data carrier.
Repeat sequence (A–B)
With this function you can repeat playback of a favourite sequence within a chapter of the current playback disc.
To do this …
•During playback press the A – B button on the remote control as soon as the
desired sequence starts to playback. 
A appears on the television screen.
•Press the A – B button again as soon as the end of the desired sequence is played back. Pay careful attention to the fact that the start and finish of the sequence must be located within a chapter.
AB appears on the television screen.
Repeat playback of the selected sequence begins immediately without you
having to press the PLAY/PAUSE button. The sequence will continuously re- peat until you press the A – B button again in order to switch off the function.
Setting playback volume
Press the VOL + button on the remote control during playback to increase play- back volume or the VOL – button to reduce playback volume.
Set the audio channel
Press repeatedly the L/R/ST button on the remote control to set one of the available audio channels (LEFT MONO, RIGHT MONO,
Repeat function for DVDs, VCDs, S-VCDs and audio CDs
With the repeat function you can…
... in the case of DVDs, selectively repeat title, chapter or the entire DVD.
... in the case of
... in the case of audio CDs, playback repeatedly a particular track and/or the entire CD.
To switch on repeat playback...
• Press the REPEAT button several times during playback.
The repeat symbol 
appears in the display with one of the following notifications:
CHAPTER
Dimmer
Press the DIMMER button on the remote control to change the brightness of the display on the DVD player in three stages (Bright, medium, off).
- 17 -
