6.3 2 kW radar processor connections
There are four interface connectors on the rear of the 2 kW radar processor, plus a Chassis Earth.
You can connect the Navico radar processor to either ot the following but not to any simultaneously.
•Simrad NX40 NX45, GB40
•Northstar 8000i, 6100, 6000i, M84, M121
•Lowrance GlobalMap 9300c HD, 9200c, 8300c, 8200c, Baja 440c, 7300c, 7200c, 5200c, 5300c, Baja 540c,
2 kW radar processor interface connectors
Connector name | Connector function | Connects to... |
Network | Ethernet communications for | GB40 / 8000i network, using Navico |
| Simrad GB40 and Northstar | network cables (NS00481X). 0.5 m, 2 |
| 8000i | m, 5 m and 10 m available |
|
|
|
Power (+ve and | Power input | Ship's power 12 V DC ONLY (using the |
|
| power cable) |
|
|
|
NMEA / Comms | Data communications for: | Simrad NX40/45, Northstar 84/121 |
| Simrad NX40/45 | use the communication cable in the |
| Northstar 6000i, 6100i, M84 | radar connection kit (AA002461) |
|
| |
| and M121 systems) | 6000i or 6100i display unit, using |
| Lowrance systems as above | radar communications cable |
| (NS003107) | |
| Remote power control, relay | |
| Lowrance systems as above using the | |
| and ignition | RIM300 Cable |
| NMEA communications for | |
| 6000i, 6100i, M84, M121 or 8000i | |
| compass input | |
| remote power signals, relay or | |
|
| |
|
| ignition; cable not supplied |
|
| NMEA / SimNet compliant compass; |
|
| cable not supplied |
|
|
|
Scanner | Scanner communications | Scanner, using the interconnection |
|
| cable (NS003100 or NS003101) |
|
|
|
Chassis earth | Grounding point | Vessel's Ground using ground wire |
|
|
|
