7.3 Northstar 8000i / Simrad GB 40 using NMEA 0183 heading
The diagram below shows how to connect the radar to a Northstar 8000i or Simrad GB40 system for vessels that use a NEMA 0183 heading sensor
For key information (page 33)
Key | Part | Description |
| Number |
|
A | AA010024SI | 2 Kw Scanner comes with 15 m (49 ft) (NS003100) Cable attached. |
| M | Cable from Scanner connects to Radar Processor box. An Optional |
|
| longer cable is available but only upto 20 m (65.5 ft) |
|
|
|
B | NS003100 | Optional 20 m (65.5 ft) Scanner cable. Will require disassembly of |
|
| dome to connect this replacement cable. Cable has radar processor |
|
| connector on one end and 3 small terminated flat connector on the |
|
| other |
|
| CAUTION: Installation of this cable should only be done by experienced |
|
| radar service technicians: Installation is difficult |
|
|
|
