Singer 9910EFSC.PM6 Inserting Zippers Lapped Insertion, To Open the Zipper While Stitching

INSERTING ZIPPERS LAPPED INSERTION

No. 1 Straight Stitch (Center Needle Position)

Zipper Foot

CAUTION: To prevent accidents. Zipper foot should be used for sewing center needle position straight stitch No. 1 only. It is possible that needle could hit the presser foot and break when sewing other patterns.

1.Baste the zipper opening to the seam line.

a:Top stitch,

b:End of opening,

c:Basting

d:Wrong Side of fabric

2.Fold back to the left seam allowance.

Turn under the right seam allowance to form 3 mm fold.

3.Attach the zipper foot.

Attach the left side of the presser foot pin to the presser foot holder when sewing the right side of the zipper, and right side of the presser foot pin to the holder when sewing the left side of the zipper.

4.Stitch the left side of zipper from bottom to top.

5.Turn the fabric right side out stitch across the lower end and right side of zipper.

6.Stop about 5 cm from the top of zipper. Remove the basting and open the zipper. Stitch the remainder of the seam.

A.TO OPEN THE ZIPPER WHILE STITCHING

1.Stop stitching before you reach the slider.

2.Lower the needle into fabric.

3.Raise the presser foot and open the zipper.

4.Lower the presser foot and continue stitching.

a.Slider

58

5 mm

7-10 mm

9910EFSt.pm6 58 2003.9.10, 8:47 PM