LED Indicators

LED Indicators

The Wireless USB Adapter includes two status LED indicators, as described in the following figure and table.

WPS Authentication

802.11b/g/n Link/Activity

LED

Status

Description

WPS

On/Flashing Green

Indicates the WPS button is pressed, and WPS authentication is

 

 

in progress.

 

 

 

 

Off

Indicates WPS authentication is not in progress.

 

 

 

Link/Activity

On/Flashing Green

Indicates the power is on, and the 802.11b/g/n radio is enabled.

 

 

Flashing indicates wireless network activity.

 

Off

Indicates the power is off, or the 802.11b/g/n radio is disabled.

 

 

 

WPS Button

Use the WPS button on the Wireless USB Adapter to automatically connect multiple devices to the network. Within two minutes, press the physical or virtual button on wireless client devices to enable them to join the WLAN.

The WPS configuration process may be initiated on any device and there is no restriction to the order in which buttons are pressed.

Any WPS-compatible devices could unintentionally join the WLAN if they are within range during the two-minute set up period after the WPS button is pressed.

For more details about Wi-Fi Protected Setup, please refer to “WPS” on page 3-14.

1-3

Page 19
Image 19
SMC Networks SMCWUSBS-N manual LED Indicators, WPS Button