Instructions for the User
5.2.3 Programming
Cooking duration: the cooking duration can be set. Before it can be set, the thermostat must be turned to the cooking temperature required and the function selector knob to any setting. To set the cooking duration, proceed as follows:
- | Press the | key and the display will light up as |
| |
| shown in figure 1. |
| ||
- | Keep the | key pressed and at the same time |
| |
| use | or | keys to set the minute minder. |
|
| Each time a key is pressed, 1 outside segment, | 1 | ||
| representing 1 minute of cooking time, will light | |||
|
| |||
| up or go out. Keep both value modification keys |
| ||
| pressed to change the numbers displayed more |
| ||
| quickly. |
|
|
|
- The maximum programmed cooking duration is |
| |||
| 11 hours and 59 minutes. |
| ||
- After one complete revolution, the numbers will |
| |||
| start to | flash | in sequence, indicating that the | 2 |
time has exceeded 60 minutes. For example, figure 2 shows a cooking duration of 2 hours and
40 minutes.
-A few seconds after the last key is pressed, the programmed cooking operation will start; when it finishes, the buzzer will sound.
-At the end of the cooking time the timer will switch the oven heating elements off, the beeps will start to sound and the numbers on the display will flash.
-At the end of the time set, 10 beeps will sound in sequence; they are
repeated 3 times at one minute intervals. This sequence can be stopped at any time by pressing 
or 
.
-The 
key can be pressed while the buzzer is active to vary the volume.
-The duration can also be reset by resetting the program selected:
pressing the central 
key for a few seconds will delete the duration set and the oven will have to be switched off in manual mode.
At the end of programmed cooking, manual operation of the oven has to be restored by holding down the 
key for a few seconds.
57
