Smeg DOSCA36X-8, smeg Double Oven Removing guide frames, Removal of self-cleaning side panels

Models: smeg Double Oven DOSCA36X-8

1 37
Download 37 pages 40.31 Kb
Page 28
Image 28
10.6 Removing guide frames

Instructions for the user

EN

The oven should be operated at the maximum heat setting for 15/20 minutes after use of specific products, to burn off the residues left inside the oven.

When the operation is complete, damp parts should be dried thoroughly.

10.6 Removing guide frames

Removing the guide frames makes it easier to clean the side walls of the oven. To remove the guide frames proceed as follows:

• pull the front part of the frame toward the inside of the oven in order to unhook it from its housing 3;

• slide the frame out of the seats located on the back 4;

When cleaning is complete, repeat the above procedures in reverse order to put the guide frames back in.

410.7 Removal of self-cleaning side panelsManual backgroundManual background

3

10.7 Removal of self-cleaning side panels

Removing the self-cleaning panels makes it easier to clean the side walls of the oven.

Remove the guide frames as described in paragraph "10.6 Removing guide frames";

Separate the self-cleaning panels from the guide frames, removing the ends of the frames from the slots on the panels;

When cleaning is complete, repeat the above procedures in reverse order to put the self-cleaning panels back in.

1

2

29

Page 28
Image 28
Smeg DOSCA36X-8, smeg Double Oven Removing guide frames, Removal of self-cleaning side panels, Instructions for the user