Instructions for the User
Lift up the edge of the lower heating element a few centimetres and clean the bottom.
Put the pizza plate support back in place, pushing it in until it hits the back of the oven, and push it down so that the heating element plate is embedded into the base itself.
When the operation is complete, damp parts should be dried thoroughly.
8.5.1 Removing guide frames
Removing the guide frames makes it easier to clean the side parts, and it also needs to be done whenever the automatic cleaning cycle is used (only available on some models).
• To remove the guide frames, pull the frame towards the inside of the oven to unhook it from its housing A, then slide it out of the seats at the back B.
• When cleaning is complete, repeat the above procedures to put the guide frames back in.
47
