Instructions for the User
8.7.2 Setting the cleaning cycle
In ON mode (see 6.5 Operating modes), turn the
ON/OFF knob right or left to select one of the two
cleaning cycles out of 
and 
.
To start the cleaning cycle (pyrolysis), the
temperature selection knob must be pressed.
will light up to indicate that it is now possible to set the cycle duration.
(Temperature knob)
Turn the knob right or left to increase or decrease the duration of the cycle between a minimum of 1h 30m
and a maximum of 3h 00m (apart from the 
cycle where the duration is set at 1h 30m).
(Temperature knob)
The text “Piro” will appear on the display to indicate that the oven is performing the cleaning cycle.
The time remaining to the end of the cleaning cycle will also be shown.
Two minutes after the cleaning cycle (Pyrolysis) starts an interlock device which prevents opening of
the door will be tripped. 
will light up to indicate
that the locking device has been activated.
At the end of the cleaning cycle, the locking device will remain active until the temperature inside the oven has reached a safety threshold. When the oven has cooled down, collect the residues from automatic cleaning with a damp microfibre cloth.
51
