Instructions for the installer
When installing in tall units, comply with the dimensions shown in figures 1 and 2, bearing in mind that the top/rear of the unit must have an opening
Remove the screw covers on the frame and screw in the 2 screws A (fig. 5) to fix the appliance to the unit. Replace the screw covers. For installing beneath a countertop hob, allow for a rear and bottom clearance as shown in Figure 1 (ref. F).
See the relevant instructions for fitting and securing the appliance.
FIG.1
Measurements
(mm)
64
A
583 ÷ 585
B
554 ÷ 564
C
490 ÷ 500
D
560 min.
E
35 ÷ 40
