Smeg SAP112-8 manual Instructions for the User, Setting the assisted cleaning cycle

Instructions for the User

•Spray a water and washing up liquid solution inside the oven using a spray

nozzle. Aim the spray towards the side walls, roof, floor and deflector (the coloured zone on the illustration to the side shows where the solution can be sprayed).

Do not spray excessive amounts of the water and washing up liquid solution. We recommend spraying approx. 20 times at the most.

•Close the door and set the assisted cleaning cycle.

8.8.2 Setting the assisted cleaning cycle

The assisted cleaning cycle can be only be activated when the oven is cold. If it is activated when the inside of the oven is still hot, the word STOP will appear on the display.

In ON mode (see 6.5 Operating modes), turn the

ON/OFF knob right or left to select the VAPOR

CLEAN cleaning cycle.

(ON-OFF knob)

To start the cleaning cycle (VAPOR CLEAN), the

temperature selection knob must be pressed.

will light up to show that the cleaning phase is in progress.

(Temperature knob)

The display will show the temperature at which the cleaning cycle is taking place and the remaining time.

54