LAN9500/LAN9500i

Hi-Speed USB 2.0 to 10/100

Ethernet Controller

PRODUCT FEATURES

Datasheet

Highlights

„Single Chip Hi-Speed USB 2.0 to 10/100 Ethernet Controller

„Integrated 10/100 Ethernet MAC with Full-Duplex Support

„Integrated 10/100 Ethernet PHY with HP Auto-MDIX support

„Integrated USB 2.0 Hi-Speed Device Controller

„Integrated USB 2.0 Hi-Speed PHY

„Implements Reduced Power Operating Modes

Target Applications

„Embedded Systems

„Set-Top Boxes

„PVR’s

„CE Devices

„Networked Printers

„USB Port Replicators

„Standalone USB to Ethernet Dongles

„Test Instrumentation

„Industrial

—Preamble generation and removal

—Automatic 32-bit CRC generation and checking

—Automatic payload padding and pad removal

—Loop-back modes

—TCP/UDP/IP/ICMP checksum offload support

—Flexible address filtering modes

–One 48-bit perfect address

–64 hash-filtered multicast addresses

–Pass all multicast

–Promiscuous mode

–Inverse filtering

–Pass all incoming with status report

—Wakeup packet support

—Integrated Ethernet PHY

–Auto-negotiation

–Automatic polarity detection and correction

–HP Auto-MDIX support

–Link status change wake-up detection

—Support for 3 status LEDs

—External MII and Turbo MII support HomePNA™ and HomePlug® PHY

„Power and I/Os

—Various low power modes

—11 GPIOs

—Supports bus-powered and self-powered operation

—Integrated power-on reset circuit

—External 3.3v I/O supply

–Internal 1.8v core supply regulator

Key Benefits

„USB Device Controller

—Fully compliant with Hi-Speed Universal Serial Bus Specification Revision 2.0

—Supports HS (480 Mbps) and FS (12 Mbps) modes

—Four endpoints supported

—Supports vendor specific commands

—Integrated USB 2.0 PHY

—Remote wakeup supported

„High-Performance 10/100 Ethernet Controller

—Fully compliant with IEEE802.3/802.3u

—Integrated Ethernet MAC and PHY

—10BASE-T and 100BASE-TX support

—Full- and half-duplex support

—Full- and half-duplex flow control

„Miscellaneous Features

—EEPROM Controller

—IEEE 1149.1 (JTAG) Boundary Scan

—Requires single 25 MHz crystal

„Software

—Windows XP/Vista Driver

—Linux Driver

—Win CE Driver

—MAC OS Driver

—EEPROM Utility

„Packaging

—56-pin QFN (8x8 mm) Lead-Free RoHS Compliant package

„Environmental

—Commercial Temperature Range (0°C to +70°C)

—Industrial Temperature Range (-40°C to +85°C)

SMSC LAN9500/LAN9500i

DATASHEET

Revision 1.7 (10-02-08)