SMSC LAN9500, LAN9500i manual 21

Hi-Speed USB 2.0 to 10/100 Ethernet Controller

Datasheet

			Table 3.1 EEPROM Format (continued)
	09h	Configuration Flags
	0Ah	Language ID Descriptor [7:0]
	0Bh	Language ID Descriptor [15:8]
	0Ch	Manufacturer ID String Descriptor Length (bytes)
	0Dh	Manufacturer ID String Descriptor EEPROM Word Offset
	0Eh	Product Name String Descriptor Length (bytes)
	0Fh	Product Name String Descriptor EEPROM Word Offset
	10h	Serial Number String Descriptor Length (bytes)
	11h	Serial Number String Descriptor EEPROM Word Offset
	12h	Configuration String Descriptor Length (bytes)
	13h	Configuration String Descriptor Word Offset
	14h	Interface String Descriptor Length (bytes)
	15h	Interface String Descriptor Word Offset
	16h	Hi-Speed Device Descriptor Length (bytes)
	17h	Hi-Speed Device Descriptor Word Offset
	18h	Hi-Speed Configuration and Interface Descriptor Length (bytes)
	19h	Hi-Speed Configuration and Interface Descriptor Word Offset
	1Ah	Full-Speed Device Descriptor Length (bytes)
	1Bh	Full-Speed Device Descriptor Word Offset
	1Ch	Full-Speed Configuration and Interface Descriptor Length (bytes)
	1Dh	Full-Speed Configuration and Interface Descriptor Word Offset
	Note: EEPROM byte addresses past 1Dh can be used to store data for any purpose.
	Table 3.2 describes the Configuration Flags.
			Table 3.2 Configuration Flags Description
BIT	NAME			DESCRIPTION
7:3	RESERVED			-
2	Remote Wakeup Support			0 = LAN9500/LAN9500i does not support remote wakeup.
				1 = LAN9500/LAN9500i supports remote wakeup.
1	RESERVED			-
0	Power Method			0 = LAN9500/LAN9500i is bus powered.
				1 = LAN9500/LAN9500i is self powered.

SMSC LAN9500/LAN9500i	21	Revision 1.7 (10-02-08)
	DATASHEET