7.In the next screen, enter the User name and Password. Tap on the
Advanced button.
8.In the General screen, enter the following settings:
•Baud rate: 115200
•Wait for dial tone before dialing: Unchecked
Uncheck 
9.If your network uses DHCP, tap ok. In the last screen, tap Finish.
If you need to enter IP addresses, tap on the TCP/IP and Servers tabs to enter the necessary settings. Tap ok. In the last screen, tap Finish.
Now you have finished creating a connection and are ready to dial up to your network. Socket recommends using either of two methods for dialing in and connecting to your network.
