Page 170 SonicWALL Internet Security Appliance Administrator’s Guide
2. Select Remote Gateway from the DHCP Relay Mode menu.
LAN IP Addresses
3. Select the VPN Security Association to be used for the VPN tunnel from the Obtain using DHCP
through this SA menu.
Alert Only VPN Security Associations using IKE can be used as VPN tunnels for DHCP.
4. The Relay IP address is a static IP address from the pool of spec ific IP addresses on the Central
Gateway. It should not be available in the scope of DHCP addresses. The SonicWALL can also
be managed through th e Relay IP address.
5. If you enable Block traffic through tunnel when IP spoof detected, the SonicW ALL blo cks an y
traffic across the VPN tunnel that is spoofing an authenticated user’s IP address. If you have
any static devices, however, yo u must ensu re that t he corr ect E therne t addr ess is en tere d for
the device. The Eth ernet address is used as par t of the identification pro cess, and an incorrect
Ethernet address can cause the SonicWALL to respond to IP spoofs.
6. If the VPN tunnel is disrupted, temporary DHCP leases can be obtained from the local DHCP
server. Once the tunnel is again active, the local DHCP server stops issuing leases. Enable the
Obtain temporary lease from local DHCP server if tunnel is down check box. By enabling this
check box, you have a fai lover option in case the tunnel ceas es to function. If you want to allow
temporary leases for a certain time period, enter the number of minutes for the temporary lease
in the Temporary Lease Time box. The default value is two (2) minutes.