Hardware Descriptions Page 241
SonicWALL PRO 100 Front Panel
The SonicWALL PRO 100 front panel is shown below, followed by a description of each item.
SonicWALL PRO 100 Front Panel Description
Power
Lights up when power is appl ied to the SonicWALL PRO 100.
Test
Lights up when the S onicWALL PRO 100 is first po wered up and performing diagn ostic tests to
check for proper operation. These tests take about 90 seconds. If the Test LED remains lit after
this time, the software is corrupt and must be reinstalled.
There are three Ethernet ports; one for each of the LAN, DMZ, and WAN ports:
Link
Lights up when the Twisted Pair port is connected to a 10Mbps or 100 Mbps hu b or switch , or
directly connected to a computer. Note that the connected Ethernet device must support the
standard Link Integrity test.
100
Lights up w hen the Twisted Pair port is connected to a 10 0Mbps hub or s witch or direct ly
connected to a computer with a 100Mbps network interface.
Activity
Flashes when the SonicWALL PRO 100 transmits or receives a pa cket through the Twisted Pair
port.
Power LED WAN Port LEDs
Link, 100, Activity
DMZ Port LEDs
Link, 100, Activity
LAN Port LEDs
Link, 100, Activity
Test LED