
Allowing DMZ -> LAN Connection
When users have connected to the SRA, they need to be able to connect to resources on the LAN.
1.Navigate to the Network > Address Objects page.
2.In the 'Address Objects' section, click .
3.In the 'Add Object' dialog box, create an address object for the X0 interface IP address of your SonicWALL SRA, then click OK.
| Name |
| Name for the SonicWALL SRA |
|
|
|
|
| Zone Assignment |
| DMZ |
|
|
|
|
| Type |
| Host |
|
|
|
|
| IP Address |
| 'X0' IP address of the SRA appliance |
|
|
| within your DMZ range, such as |
|
|
| 10.1.1.200 |
|
|
|
|
4. Click | again to create an address object for |
the NetExtender range.
5.In the 'Add Object' dialog box, create an address object for the X0 interface IP address of your SonicWALL SRA, then click OK.
Name | Name for NetExtender |
|
|
Zone Assignment | DMZ |
|
|
Type | Range |
|
|
Starting IP Address | Start of the NetExtender IP address |
| range within your DMZ range, e.g., |
| 10.1.1.220 |
|
|
Ending IP Address | End of the NetExtender IP address |
| range within your DMZ range, e.g., |
| 10.1.1.250 |
|
|
6.In the 'Address Groups' section, click .
Page 34 Scenario B: SRA on an Existing DMZ