Scenario B: Connecting Your Network Interfaces
Scenario B: SRA on an Existing DMZ
SonicWALL UTM Appliance
X1 |
| E7500 |
|
OPT, X2, etc | X0 |
| |
|
|
| |
Router | Switch | Switch |
|
Remote Users |
| X0 | Network Nodes |
|
|
| |
|
| SRA 1200 |
|
| SRA Appliance |
|
|
WAN |
| DMZ | LAN |
To connect the SonicWALL SRA 1200/4200 using Scenario B, perform the following steps:
1.Connect one end of an Ethernet cable to an unused port on your DMZ, either directly to the OPT or X2 on your existing SonicWALL security appliance, or to a hub or switch on your DMZ.
2.Connect the other end of the Ethernet cable to the X0 port on your SonicWALL SRA 1200/4200. The X0 Port LED lights up green indicating an active connection.
Continue to Chapter
Scenario C: Connecting Your Network Interfaces
Scenario C: SRA on the LAN
Existing Gateway Device
or Switch / Hub
| LAN Port |
Internet |
|
Router |
|
Remote Users | X0 |
| |
| SRA 1200 |
| SRA Appliance |
WAN | LAN |
To connect the SonicWALL SRA 1200/4200 using Scenario C, perform the following steps:
1.Connect one end of an Ethernet cable to an unused port on your LAN hub or switch.
2.Connect the other end of the Ethernet cable to the X0 port on the front of your SonicWALL SRA 1200/4200. The X0 Port LED lights up green indicating an active connection.
Continue to Chapter
SonicWALL SRA 1200/4200 Getting Started Guide Page 19
