Adding a NetExtender Client Route
NetExtender allows remote clients to have seamless access to resources on your local network. You can also enable Tunnel All Mode so that, when NetExtender clients connect, all the traffic will be tunneled through the NetExtender connection.
To configure a NetExtender client route:
1.Navigate to the NetExtender > Client Routes page.
2.To force all SRA client traffic to pass through the NetExtender tunnel, select Enabled from the Tunnel All Mode
3.Click Add Client Route.
4.Enter the IP address of the trusted network to which you would like to provide access with NetExtender in the Destination Network field. For example, if you are connecting to an existing DMZ with the network 192.168.50.0/24 and you want to provide access to your LAN network 192.168.168.0/24, you would enter 192.168.168.0.
5.Enter your subnet mask in the Subnet Mask field.
6.Click Add to finish adding this client route.
Page 16 Configuring Your SRA 1200/4200
