Connecting Your SRA 1200/4200
Before continuing, reference the diagrams on the following pages to connect the SonicWALL SRA 1200/4200 to your network.
Refer to the options in “Selecting a Deployment Scenario” on page 7 to determine the proper scenario for your network configuration:
•Scenario A: Connecting Your Network Interfaces - page 18
•Scenario B: Connecting Your Network Interfaces - page 19
•Scenario C: Connecting Your Network Interfaces - page 19
Scenario A: Connecting Your Network Interfaces
Scenario A: SRA on a New DMZ
| SonicWALL UTM Appliance |
|
X1 | E7500 |
|
| X0 | |
| OPT, X2, etc | |
|
| |
Router |
| Switch |
Remote Users | X0 | Network Nodes |
|
|
SRA 1200 |
SRA Appliance
WAN | DMZ | LAN |
To connect the SonicWALL SRA 1200/4200 using Scenario A, perform the following steps:
1.Connect one end of an Ethernet cable to the OPT, X2, or other unused port on your existing SonicWALL security appliance.
2.Connect the other end of the Ethernet cable to the X0 port on the front of your SonicWALL SRA 1200/4200. The X0 Port LED lights up green indicating an active connection.
Continue to Chapter
Page 18 Connecting Your SRA 1200/4200
